How to Stack Mars Video with Weighted Quality Stacking
Process Mars videos online and reveal surface features. Stack and enhance polar caps, dark regions, and dust storms.
Advanced Mode Tutorial
This guide covers manual configuration in Advanced Mode where you select the stacking algorithm and fine-tune all parameters. For automatic processing, try Quick Mode - it detects your video type and applies optimal settings automatically.
TL;DR
Want full control over your Mars processing? Weighted Quality Stacking is a Intermediate-level algorithm. Your sharpest frames contribute most - ideal for variable seeing It works especially well for White polar ice caps (CO2 and water ice). This guide shows you how to configure Weighted Quality Stacking in Advanced Mode for optimal results.
Introduction
Mars is one of the most rewarding targets for amateur astrophotographers. With its White polar ice caps (CO2 and water ice) and Dark albedo features (Syrtis Major, Mare Acidalium), even modest equipment can capture impressive detail. However, raw video footage straight from your camera rarely shows the full potential of your observations.
This is where Weighted Quality Stacking comes in. By intelligently combining hundreds or thousands of video frames, Weighted Quality Stacking Measures sharpness of each frame using Laplacian variance. The result? A single image with dramatically improved detail and reduced noise.
In this guide, you'll learn exactly how to use Weighted Quality Stacking to process your Mars videos using Uranum AstroStack AI - a cloud-based tool that replaces complex desktop software like PIPP, AutoStakkert, and Registax with a simple, browser-based workflow.
Whether you're using a smartphone through an eyepiece or a dedicated planetary camera, this tutorial will help you achieve professional-quality results.
What is Weighted Quality Stacking?
Gives sharper frames more influence in the final result (up to 3x weight). Good seeing moments dominate while poor frames still contribute some signal. Ideal when your video has varying quality due to atmospheric turbulence.
How It Works:
- 1Measures sharpness of each frame using Laplacian variance
- 2Sharp frames get up to 3x more weight in the final average
- 3Blurry frames contribute less, preserving detail from good moments
- 4Weights are normalized to prevent any single frame dominating
Best For:
- Nights with variable atmospheric seeing (most common scenario)
- Capturing those brief moments of excellent clarity
- Jupiter cloud bands and Saturn rings where micro-detail matters
- Videos longer than 30 seconds with varying quality
Not Recommended For:
- •Very short captures (<500 frames) - not enough variation to matter
- •Uniformly excellent seeing - all frames similar quality
- •Smartphone video where compression limits sharpness detection
Why Use Weighted Quality Stacking for Mars?
Mars presents unique challenges for astrophotographers: Very small apparent size except near opposition (max ~25 arcsec) and Surface detail is low contrast - very sensitive to seeing. Weighted Quality Stacking is one of the recommended algorithms for Mars because it effectively addresses these challenges.
Weighted Quality Stacking is Recommended for Mars
- Feature Enhancement: Mars's White polar ice caps (CO2 and water ice) benefit from Weighted Quality Stacking's ability to Nights with variable atmospheric seeing (most common scenario).
- Challenge Mitigation: The Very small apparent size except near opposition (max ~25 arcsec) is handled well because Weighted Quality Stacking Sharp frames get up to 3x more weight in the final average.
- Skill Level: As a Intermediate-level algorithm, Weighted Quality Stacking is suited for users who want more control over results.
Pro tip: For Mars, you might also try Local Quality Stacking or Sigma-Clip Stacking for comparison.
Step-by-Step Tutorial
Follow these steps to process your Mars video using Uranum AstroStack AI. The entire process takes about 5-10 minutes.
Step 1: Capture Your Mars Video
For best results, capture 5,000-15,000 frames at 100-200 fps. Maximum duration: 2-3 minutes (24.6h rotation). Use 5-15ms exposure at Medium (280-380) gain.
Tip: Mars is VERY seeing-sensitive - only image on excellent nights
Step 2: Upload Your Mars Video
Drag and drop your Mars video file into Uranum. We support AVI, SER, MP4, MOV, and MKV formats (up to 1.5GB free, 4GB Starter, 10GB Pro).
Tip: SER format preserves maximum quality. MP4/MOV have compression artifacts but still work well.
Step 3: Select Mars as Object Type
Choose "Mars" from the object type dropdown. This applies optimized defaults including stack percentage (10-20%) for average seeing and enhancement settings tuned for White polar ice caps (CO2 and water ice).
Tip: Quick Mode will auto-detect optimal settings. Use Advanced Mode only if you need specific control.
Step 4: Choose Your Mode
Quick Mode: Automatic processing with intelligent frame selection - recommended for most users. Advanced Mode: Manual control over Weighted Quality Stacking and all parameters.
Tip: Quick Mode uses knee-detection to find optimal stack percentage automatically.
Step 5: For Advanced Mode: Select Weighted Quality Stacking
In the Stacking section, choose "Weighted Quality Stacking". Your sharpest frames contribute most - ideal for variable seeing
Tip: Weighted Quality Stacking is Intermediate-level. Nights with variable atmospheric seeing (most common scenario).
Step 6: Set Stack Percentage Based on Seeing
Adjust based on your seeing conditions: Poor (5-10%), Average (10-20%), Good (20-30%), Excellent (30-40%). When in doubt, start with 10-20%.
Tip: Lower percentage = sharper but noisier. Higher percentage = smoother but potentially softer.
Step 7: Start Processing
Click "Start Processing". Uranum analyzes frames, ranks them by quality, stacks the best ones, and applies enhancements. Processing typically takes 2-5 minutes.
Tip: Track progress in real-time. Processing time depends on frame count and your tier.
Step 8: Download Your Result
Compare before/after using the slider. Download in PNG (8/16-bit), TIFF (16-bit), or FITS (32-bit for scientific use).
Tip: 16-bit TIFF preserves the most data for further processing in PixInsight, Photoshop, etc.
Recommended Settings for Mars + Weighted Quality Stacking
These are recommended starting values for Mars videos with Weighted Quality Stacking in Advanced Mode. Use them as a baseline and adjust based on your specific video quality and conditions.
| Setting | Value | Explanation |
|---|---|---|
| Capture Duration | 2-3 minutes (24.6h rotation) | Mars has specific rotation limits. Exceeding this causes motion blur that stacking cannot fix. |
| Frame Count Target | 5,000-15,000 frames | More frames = more to choose from. Capture at 100-200 fps for optimal sampling. |
| Stack Percentage (Average Seeing) | 10-20% | For typical seeing conditions, stack 10-20% of frames. Adjust based on your seeing: poor (5-10%), average (10-20%), good (20-30%), excellent (30-40%). Quick Mode auto-detects optimal percentage. |
| Stacking Algorithm | Weighted Quality Stacking | Your sharpest frames contribute most - ideal for variable seeing |
| Wavelet Preset | Balanced to Aggressive | Mars benefits from moderate to strong sharpening (small target needs enhancement). Quick Mode auto-selects based on image sharpness analysis. |
| Output Format | 16-bit PNG or TIFF | 16-bit preserves maximum tonal information. Use for further processing in other software. |
| Quality Weighting | Automatic (up to 3x) | Sharp frames automatically contribute up to 3x more than blurry frames. No manual adjustment needed. |
Capture Settings Reminder
For best results with Mars, capture at 100-200 fps with 5-15ms exposure and Medium (280-380) gain.
Tips for Best Results
Capture Tips for Mars
- Mars is VERY seeing-sensitive - only image on excellent nights
- Use IR-pass filter (685nm+) to cut through atmospheric turbulence
- Stack only the best 10-20% - Mars rewards selectivity
- Perihelic oppositions (Mars near perihelion) give largest apparent size
Processing Tips
- Start with Quick Mode to see baseline results
- Use Advanced Mode to fine-tune wavelets and sharpening
- Export as 16-bit TIFF for maximum quality
- Compare different algorithms to find your preference
Common Mistakes to Avoid
- •Don't over-sharpen - it creates artifacts and noise halos
- •Don't stack 100% of frames - quality matters more than quantity
- •Don't capture during poor seeing - wait for stable air
- •Don't forget to let your telescope acclimate to outside temperature
Frequently Asked Questions
Common questions about planetary video stacking and processing.
Related Guides
Explore more tutorials to expand your planetary imaging skills.
Weighted Quality Stacking for Other Planets
Ready to Process Your Mars Videos?
Transform your planetary videos into stunning images with Uranum AstroStack AI. No installation required - process directly in your browser.
Free tier includes 3 processings per month. No credit card required.